GA313 series sizing machine is applied to high-count-density wide hometextile fabric,it is used to is used for the warp of pure cotton, polyester cotton and staple fabric and its blender with metric count 97tex～7tex（6 s～80 s）and total warp ends 3000～26000.
1.GA313 series machine now adopts the most advanced control system with 9-unit drive and high precision control, which can promote the matching ability of sizing machine.
2.This machine adopts the most advanced technological process in the world, and humanized design, which is easy to operate and maintain.
3.The width of sizing box increases to 2.2m or 2.4m, which is suitable for wide home textile series and reduce the cover factor effectively.
4.Sizing quality can be increased and beam number can be reduced, which brings the users easy operation and productivity efficiency, energy saving and high drying efficiency.
5.High Intelligence: Adopting expert systems that when operators input various parameter into computer, the system will automatically control the machine to work, Knowing the machine working state on computer, the fault diagnosis, remote monitoring and diagnosis can be carried out easily.
6.High precision: Adopting “Profibus” communications protocol to do data exchange and detection & controlling, as well as Servo frequency converter & variable frequency motor nine-unit driving, both the designs make the machine rapid response, high precision, good stability.
7.High quality: high power 74kw driving design, linear pressure 40kn, dry capacity 1000kh/h, exhaust system 24000m3/h, speed 125m/min
8.Low energy-consumption: flexible frequency control system makes low cost, PID high precision control of temperature and moisture regain can save energy when dry yarn, linear high pressure model makes sizing stable, which can save sizing agent.
|Application:||GA313 series sizing machine is used for the warp of pure cotton, polyester cotton and staple fabric and its blender with metric count 97tex～5tex（6 s～120 s）.|
|Nominal width of headstock:||300cm,360cm,400cm|
|Speed： 2-125 m/min crawl speed：2m/min snail speed：0.5m/min|
|Diameter of weaving beam（mm）:||Φ800orΦ1000|
|Max. winding tension（N）:||7000|
|Working width （mm）||2200mm or 2400mm|
|Quantity of drying cylinder||14|
|Quantity of warping beam creel||total 24, 6 units|
|Quantity of sizing box||2|
|wet split rods||There is independent double wet split rods, collocated with variable frequency gear motor separately, which making speed change with the machine speed . Because of the steam fumigation，drops on the surface of wet split rods, which makes water protective film, and makes fiber smooth. KARL MALIMO without configuration like this.|
|waxing device||Use separate frequency waxing transmission device，which can adjust the synchronous speed of waxing roller according to different requirements of waxing quantity, in order to control the waxing quantity.|
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.