Description

Model: ZHR056

Capacity: 30~35tons per day (Fiber)

Diameter of Press roller: 610mm

Working width of roller: 1828mm

Adjustable gap between rollers: 4~16mm

Net weight of flanged roller: 2180kgs

Net weighr of non-flanged roller: 20160kgs

Diameter of hole on the sieve mesh: 1.0mm

Pitch between the holes on sieve mesh: 2.0mm

Thickness of sieve plate: 2.5mm

Roller rotation speed: 0.5~2.8RPM(1.56RPM at 50HZ)

Normal linear pressure between press rollers: 13T

Maximum linear pressure between press roller: 20T

Maximum working pressure of slurry trough: 0.1Mpa

There is a pressure sensor on the bearing house of rear press roller. It can test the pressure between two press rollers. The material of perforated sheet is SS316L

Main drive for AC press: geared motor, SEW make, 11KW

Power supply: 380V±10%, 50HZ±3%, Insulation

                        Class=F, Protection=IP55, Frame

                         Size=IEC standard, permissiable temeprature

                         Raise=Class B(80 deg. C)

Transmission to press rollers: worm & worm wheel

Trough sealing: Teflon

Coupling: Chinese make

Bearing for press rollers: SKF/NSK

 

                        

 

Inquiry

If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.

Releated Products