This machine can accurately control length and arrangement of warp yarn. It is suitable for directly warping of various kinds of chopped yarns and is the pre-spinning preparation equipment for various kinds of shuttleless looms.
The machine is controlled by PLC and displaying is realized by touching screen. Malfunction can be displayed in the touch screen with simple operation. Big V-shaped continuous bobbin creel is especially suitable for some staple fibers which are sensitive to friction, working under low tension and high speed, be favorable to reduce tension difference of yarn and end breakage when warping. The inner side of V-shaped creel could store bobbin, which is convenient for operation. The bobbin changing time is short so that it can save idle period for warping machine. This kind of bobbin creel is especially fit for high speed warping.
|Application:||This machine is suitable for the yarn of pure cotton, polyester cotton ,staple fabric and its blenders with the yarn count 6s～100s.|
|Nominal Width (mm):||1800|
|Warp beam winding diameter(mm):||Φ800|
|Total power:||20kw (without air compressor)|
|Braking distance:||≤3m (when speed is 500m/min)|
|Bobbin creel||big “V”bobbin creel|
|Tensioner||Special tensioner for high-speed warping machine|
|Dimension (L*W*H)||About 21m*5.5m*3m|
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.